Items:
0
Welcome, Guest | Login
FREE SHIPPING OVER $50 TO THE LOWER 48 STATES!

Jeep Wrangler JK Lifted Rear Axle Track Bar Bracket

Part Number:

B4WK12407

Availability:

In Stock
Jeep Wrangler JK Lifted Rear Axle Track Bar Bracket
Jeep Wrangler JK and JKU Lifted Rear Track Bar Bracket
Your Price: $35.00
review
5
0
5
If you have lifted you 2007-2018 Jeep Wrangler JK or JKU and want to correct the roll center to minimize body roll, this is the track bar bracket that you need.  Corrected geometry of your rear track bar can be achieved with this bracket, leading to less body roll and better handling on-road and off-road.  This track bar bracket is designed to be used on lifted applications with at least 2-1/2 inches of lift or more, three mounting locations have been integrated in this bracket to accommodate various lift heights.  Manufactured from brutally strong 1/4 inch steel, this bracket is a great upgrade for weak bolt on aftermarket brackets that come with most lift kits.  Installation is simple, trim your factory track bar bracket, align the hole in the existing factory bracket with the hole in this bracket, and weld in place.  Welding is required for installation, and the bracket will need to be painted or powder coated after installation.

Vehicle applications:
2007-2018 Jeep Wrangler JK 2 Door
2007-2018 Jeep Wrangler Unlimited 4 Door


Same Day Shipping
On most orders placed by 3pm EST when choosing UPS shipping options
text
If you have lifted you 2007-2018 Jeep Wrangler JK or JKU and want to correct the roll center to minimize body roll, this is the track bar bracket that you need.  Corrected geometry of your rear track bar can be achieved with this bracket, leading to less body roll and better handling on-road and off-road.  This track bar bracket is designed to be used on lifted applications with at least 2-1/2 inches of lift or more, three mounting locations have been integrated in this bracket to accommodate various lift heights.  Manufactured from brutally strong 1/4 inch steel, this bracket is a great upgrade for weak bolt on aftermarket brackets that come with most lift kits.  Installation is simple, trim your factory track bar bracket, align the hole in the existing factory bracket with the hole in this bracket, and weld in place.  Welding is required for installation, and the bracket will need to be painted or powder coated after installation.

Vehicle applications:
2007-2018 Jeep Wrangler JK 2 Door
2007-2018 Jeep Wrangler Unlimited 4 Door


5 Stars
Owner
Excellent product. Easy to install.
Reviewed by: (Verified Buyer)  from Gearheart's Garage & 4x4 Off-Road in Ashland Ohio. on 5/30/2020
5/5
5 Stars
SHE WON'T BREAK
Added this bracket to my '13 JKUR's Dana 44 rear to improve its geometry & roll center running 3.5" lift. When comparing this bracket to others on the market, this seems to be the best, most reinforced design. Not only do you weld it to the axle tube, but also to the modified stock bracket. I recommend welding to the axle tubes vertical uphill if using MIG for proper weld penetration since is .250" thick. VERY hoss & would definitely recommend to a friend to run ????
Reviewed by: (Verified Buyer)  from Beaufort, SC. on 4/1/2020
5/5
Sign Up for our Specials and Discounts Newsletter