Horizontal Four Link Truss Bracket

Part Number:

B4WK0020

Availability:

In Stock

Horizontal Four Link Truss Bracket

Questions about this item? Ask here. (See 5 Questions)

Your Price: $34.00

4 Review(s)

Looking to increase the life of your suspensions joint? Then the Barnes 4wd Horizontal four Link Truss Bracket is just what you are looking for! By orienting the joint horizontally the joint does not have to flex as much because the joint can move with the axle. This bracket is cut from ¼ steel. This comes with a 9/16 bolt hole.

*SUSPENSION JOINTS AND BOLTS NOT INCLUDED

Quantity

Same Day Shipping

On most orders placed by 3pm EST when choosing UPS shipping options

text

Description
Customer Reviews
Questions and Answers

*SUSPENSION JOINTS AND BOLTS NOT INCLUDED

Good Idea

I bought this bracket out mostly out of curiosity. After setting up the four link suspension I was impressed by how much travel can be achieved with horizontal heim joints. This bracket works very well.

Reviewed by: (Verified Buyer) Josh Pettet from Idaho. on 11/2/2018

Awesome bracket!

Great bracket perfect for upper triangulated 4 link!

Reviewed by: (Verified Buyer) Joe Garziano from New York. on 6/27/2018

Another great product...

Mounting the upper link on the axle and trying to get them as close together as possible, these work great. Nice product, will definitely use again.

Reviewed by: (Verified Buyer) David Lindemeyer from Missouri . on 3/6/2016

Solid product

Bought this a couple weeks ago and it's awesome

Reviewed by: (Verified Buyer) Cody Dorr from Oklahoma . on 5/2/2015

Q: Some people run 7/8 joints and others run 1 1/4, does this bracket work with either?

Asked by: Joshua - 12/22/2019

A: This will work with heim joints in both sizes.

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Clayton Arrowood (1/17/2020)

(Submit an answer)

Q: What is the spacing between bolt holes?

Asked by: Craig - 2/27/2020

A: The bolt holes are 3 1/4 inches apart

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: AJ Morgan (2/28/2020)

(Submit an answer)

Q: Will this work with Johnny Joints and which body size? I would like to run CE-9113NL. If I have to run heims I can.

Asked by: Jason - 4/28/2020

A: We would imagine you can with a johnny joint, however we are not sure because we made them around our enduro joints. We know for sure that they will work with this bracket. Plus you'll have a larger bodied joint which gives you more of a bushing inside the joint itself, and a longer shank for more adjust ability in your links. we attached a part number below.
B4WEJL16

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Conner (4/29/2020)

(Submit an answer)

Q: Can these holes be drilled out to accept 3/4" bolts? It's hard to tell how close the upper holes are to the relief cuts and if there is enough steel there to not weaken the upper bolt hole.

Asked by: Colin - 4/13/2020

A: Yes you should have plenty of room to drill out to 3/4.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Joe Ledford (4/14/2020)

(Submit an answer)

Q: How far apart are the link holes?

Asked by: Valhalla - 4/29/2020

A: You're looking at approximately 3 1/4" center to center.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Conner (4/29/2020)

(Submit an answer)

Horizontal Four Link Truss Bracket

Part Number:

Availability:

Price

Browse Similar Items