Q: what kind of grease is recommend to use with these joints?
A: Any kind of lithium based high temperature grease will do just fine. Typically it's just called multipurpose high temp grease at your local auto parts store.
Q: Why is the body on the longer threaded enduro joint larger than the previous enduro? Does it still have the same misalignment?
A: The body is larger to provide a larger bushing this joint will articulate 20 to 25 degrees in most setups. I recommend to run this joint with the bolt horizontal in a neutral position.
Q: Is the actual face to face of the Heim 2.5”? I just measured the brackets on my axles and it looks like they are 2 3/8”. Now what?
A: The mounting width of this joint is 2-5/8", this means that the bracket that you are going to install it in needs to be 2-5/8" wide. We do not offer and Enduro joint with a 2-3/8" mounting width. The only option that we have for the 2-3/8" mounting width would be part# HMS1609N that could be used with a 1-1/4" heim joint.
Q: Is the thread 1.25 by 12 tpi
Or 1.25 by 12m
Q: Whats length from center bolt hole to end threads.