Q: How much deeper is the diff cover? Because I am worried about my tie rod clearance.
A: This diff cover is about 3 1/4" hooking the lip to the tallest point on the cover.
Q: On this Dana 44 diff cover could you guys do a custom order? im running a Dana 44 in the front of my rear engine buggy and its flipped so I'd need the fill hole to be in the opposite position. Thanks
A: Unfortunately we do not do one off diff covers.
Q: What is the dimension, I trying to clear a 1.5 steering tie rod, 2004 Jeep tj
A: This will stick out 3 5/16" form the mounting surface.
Q: I bought one of these heavy duty covers from local 4x4 shop they didn’t have the Allan bolts with it. (What is exact size so I can pick some up from hardware store and did you say torc to 15lbs on all of cap bolts?
A: They are 5/16-18x3/4 and you need 10 of them. Yes torque them to 15ft lbs.
Q: Would we need to up the gear oil volume due to the different shape of cover? If so, about how much?
A: You will need to add gear oil to the differential until it is at least half way up the ring gear.
Q: Will your Dana 44 cover fit a 1976 Scout?
A: It should fit the axle but may not work with the factory steering and suspension.
Q: what is the allen wrench size for the fill hole?
Q: What is the height of your Dana 44 Differential Cover?
A: It has a height of 3.25 inches from the bottom of the flange to the top