These are the medium of the Shock towers we make, most vehicles will fit a 12 - 14" coilover with these. And no, they are not hoops! These are 12" above the frame at the shock mounting position center. They are 15 degrees offset from the frame. These are also the deeper model, made for wider frames, these are 2 3/8" deep when measured from the outside face of the frame towards the engine compartment. All of our shock towers are 1/4" thick and come in pairs. You must choose what width of mountinng eye for us to provide, 1 1/4", 1 1/2", or 1 3/4". Measure your shocks with any missalignment to determine what width you want. These come complete with Grade 5 Nuts and Bolts, we use Grade 5 over Grade 8 for the flexibility, Grade 8 will shear when Grade 5 will flex.