There is no question about it, a four link or three link suspension
provides the best performance no matter how you use your rig. We have a great selection of parts to build a
custom link suspension that is just right for your application.
First off you will find that our link brackets
come in a wide verity of mounting widths, mounting angles and bolt hole
sizes. Nothing is worse than getting a
box of parts and having to drill out all the bolt holes so they are large enough
for your suspension joints. That is why
we offer so many different variations of our brackets.
Next you will see that we offer three different
mounting angles. When you are setting up
your link suspension you always want to the suspension joint to be in a neutral
position so that you can maximize articulation. We offer two different mounting widths for
our brackets, 2 and 2 5/8. If you are
using a heim joint or rod end bearing with a 7/8 or smaller threaded shank you
will need the 2 brackets. If you are
using our Enduro
Joint or a heim
Joint with a 1 ¼-12 threaded shank you will need the 2 5/8 mounting width.
Not sure just what you will need for your
link suspension? Check our Link suspension
kits and let us take all the guess work out of what you need. Be sure and check out our line of Enduro Joints, heim
bungs, jam nuts, hardware kits and hi misalignment
spacers to finish out your DIY link suspension project.